Forward Planner / Toolpusher for Semi-submersible Drilling Rig (North Sea)

Position

Toolpusher

Description

Drillmar Resources are currently recruiting for the position of Forward Planner / Toolpusher on-board our client's 5th generation Semi-submersible in the North Sea (Aberdeen crew change), starting 18/09 x 3 weeks.
In order to be considered for this position, candidates must have:

IWCF Well Control Supervisors Level
Suitable experience operating Cyberbase systems.
Minimum standards for offshore travel.
Roles & Responsibilities will include but are not limited to:

•Review all operational programmes and forward planning schedules, with particular focus on preparation and planning to ensure optimal operational critical path performance. Attend all relevant pre-planning, HSE and operational meetings.

•Promote flat time reduction and all related efficiencies especially as part of the pre-job phase.

•Establish and maintain active communication with third party personnel to ensure all third-party equipment and personnel are ready in good time

•Monitor crew performance utilising the monitoring and controlling tool for Operations

•Performance core KPI list activities to determine areas of improvement. Recommend and capture improvements based on engagement with drill crew.

•Communicate these improvements to other rigs and Performance Toolpusher(s) when and where applicable.

•Administer the AAR process within the drilling department. Ensure inclusion of all other departments onboard, The Operator and third parties where necessary. Make sure all learnings are captured, actioned and shared, when appropriate.

•Monitor records for all the tallies, tubular rotating hours, tubular counts, tubular inspections, and space out calculations.

•With assistance of Client/STP/Safety Co-ordinators generate an electronic well file. The well file should include but not be limited to: Drilling Programmes, AARs, Casing programmes/tallies, Landing weight calculations, BHA Assemblies, Drill string & landing weight calculations / Maximum Over pull / Slip crushing etc, Fingerboard management spreadsheet, 24 hours look-aheads, Photographs/Videos, 3rd Party Presentations, Tubular Rotating Hours, and Well Analysis.

•Relieve Toolpusher and Drill crew as necessary.

•Work with Operator, and onboard technical department to incorporate rig maintenance into operational planning.
•Any other duties as required by Senior Toolpusher.

To apply you have to click on the APPLY JOB button.